CAS EC-II Series Manuel de service télécharger pdf (Page 6)

1. Precautions Before Using The Scale

Environment

The scale should always be used in an environment, which is free from excessive

air currents, corrosives, vibration, and temperature or humidity extremes.

These factors will affect displayed weight reading.

DO NOT install the scale:

● Next to open windows or doors causing drafts or rapid temperature changes.

● Near air conditioning or heating vents.

● Near vibrating, rotating or reciprocating equipment.

● Near magnetic fields or equipment that generates magnetic fields.

● On an unstable work surface

● In a dusty environment

● In direct sunlight.

Leveling the Scale

The scale is equipped with a level indicator on the back side, right bottom of the

front panel and four adjustable leveling feet. Adjust the leveling feet until the

bubble appears in the center circle of the indicator.

Turn on Scale

Do not turn on scale with anything on the platform.

Press the “ON/OFF” switch located on the right side of the bottom of the scale

to turn on the scale.

The scale will start to count down from nine to zero. The scale is then ready for use.

Give a warm-up for 15~30 minutes before use.

※ Attention ※

There is a dust protection cover as standard.

Before turning on the scale, the dust protection cover should be attached on the body

with using an adhesive tape so that the cover does not touch the pan. If the cover

touches the pan, a weight value can be wrong.

1 2 3 4 5 6 7 8 9 10 11 ... 75 76

Pas de commentaire

CAS EC-II Series Manuel de service Page 6