CAS LP-II Spécifications Page 41
- Page / 90
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
6 Programming
42
Label Type 0 is the standard fixed sized, gap label media with liner backing paper. The Length value is
the length of the label itself. To capture the Length value, press the ALT key twice. The scale will feed
out several labels and automatically detect the length and the gap size. Please make sure that you
have standard “gapped” labels in the printer whenever you execute this procedure.
Label Type 1 is continuous strip label media with liner backing paper. The Feed value determines the
amount of labels/paper to feed when you press the FEED key. The Feed value can be 0 mm to 170 mm.
Label Type 2 is continuous strip label media or receipt thermal paper both without liner backing paper.
Type to works the same as Type 1 except that the pick-up motor will not operate as there should be no
liner to pick-up.
The Width value is the width of the label or paper and NOT the width of the liner backing paper. It must
be specified in millimeters. If this value is incorrect then some label formats may print properly but no
receipts will print properly. Please make sure to set this value properly. The Width can be from 20 mm to
80 mm.
The Rcpt Feed value is the amount of blank space to feed after each receipt or label is printed. This is
done so that the paper cut can tear the receipt or label properly. The Rcpt Feed can be from 0 mm to
170 mm. The Rcpt Feed is only for type 1 or 2.( recommendation Rcpt Feed is 15mm )
Remember that you can press SAVE at any time or the ENTER key while the cursor is on the last field in
order to save the current screen contents and return to the previous menu. The ESC key exits and
returns to the previous menu.
6.2.7 Adjust Feed Length
Once at the SET: Settings menu screen, press the 7 key. The Adjust Feed Length screen will appear as
follows:
The Feed Adjustment is a fine adjustment that controls the print position from top-to-bottom on a label.
The higher the number, the higher the printing will appear. The lower the number, the lower the printing
will appear. The norm is 100. 1 Feed Adjustment is 1/8 of a millimeter, therefore if you change the Feed
Adjustment from 100 to 108, then everything will print 1 mm higher on the label.
You can also use this feature to make sure that when you print a label, it will come out far enough to be
easily removed from the liner backing paper. For example, if the label feeds out too far then the labels
NUMERIC
< SET: ADJUST FEED LENGTH >
Feed Adjustment :[100] (0-200)
Use FEED key to test.
Use SAVE or ENTER key to save
- Electronic Price Computing 1
- Attention: 2
- Disclaimer: 2
- TABLE OF CONTENTS 3
- 1 General 6
- 1.1 Model and Specifications 6
- 1.2 Dealers and Service 7
- 2 Unpacking and Assembly 8
- 3 Proper Operation 10
- 3.2 Leveling and Location 11
- 3.3 Don’ts 12
- 3.4 Cleaning and Maintenance 13
- 3 Proper Operation 15
- 4 Nomenclature 16
- 4.1 Scale Overview 16
- This is PLU COMMODITY 17
- 4.3 Printer 18
- PRE-PACK 19
- 5 Quick Set-Up 26
- 5.2 Basic Quick Start 28
- STEP2 STEP3 STEP1 29
- STEP3 STEP1 30
- 6 Programming 31
- 6.1 Main Menu 31
- 6.1.1 RPK: Repack Mode 32
- 6.1.2 Store Settings 32
- 6.1.4 Security Control 33
- 6.1.5 Department Names 35
- 6.1.6 Scale Assignments 36
- 6.1.7 Date and Time 36
- 6.2 Settings 37
- 6.2.1 Print Inhibiting 37
- 6.2.2 Sales Messages 38
- 6.2.3 Scrolling Message 38
- 6.2.4 Scrolling Sequence 39
- 6.2.5 Tax Rates 40
- 6.2.6 Label Type 40
- 6.2.7 Adjust Feed Length 41
- 6.2.8 Origin 42
- 6.3 PLU Programming 42
- 6.3.1 PLU Price Change 43
- 6.3.2 Creating PLUs 44
- 6.3.5 Copying PLUs 53
- 6.3.6 Edit PLUs 53
- 6.3.8 Deleting PLUs 55
- 6.3.9 Audit Trail PLUs 55
- 6.5.1 Global Label Format 57
- 6 Programming 58
- 7 Sale Modes 59
- 7.1 REG, MGR, and RPK Modes 59
- 7.2 REG Mode 59
- 7.2.3 lb/kg Key 61
- 7.2.4 ON/OFF Key 61
- Beef, 85% lean 62
- Misc By Weight PLU 63
- Misc By Count PLU 63
- Misc Non-Food PLU 63
- Golden Apple11 !! 66
- 7.2.11 SAVE key 67
- 7.2.12 AUTO/MANUAL key 67
- Common Nails 68
- Golden Delicious Apple 70
- Delicious Golden Apple 71
- 7.2.18 Temporary Date Change 72
- 7.3 MGR Mode 73
- 7.4 RPK Mode 74
- 8 X and Z Modes 75
- 8.1.1 PLU Sales 75
- 8.1.2 MISC PLU Sales 77
- 8.1.3 Group Sales 77
- 8.1.4 Department Sales 78
- 8.1.5 Scale Sales 78
- 8.1.6 Hourly Sales 79
- 8.1.7 Clerk Sales 79
- 8.1.8 Summary Report 79
- Appendix A: Country Codes 82
- GRAND TOTAL 84
- Appendix B: Label Formats 85
- 1 (ONE) YEAR 89
- Warranty 90
Produits connexes et manuels pour Balance de cuisine CAS LP-II
Balance de cuisine CAS DL-60 Spécifications
(13 pages)
(13 pages)
Balance de cuisine CAS LP-II Spécifications
(54 pages)
(54 pages)
Balance de cuisine CAS DL-60 Spécifications
(98 pages)
(98 pages)
(48 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.757 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels